Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  trade assurance medical parts supply monitoring from China for medical device
trade assurance medical parts supply monitoring from China for medical device

trade assurance medical parts supply monitoring from China for medical device
  • trade assurance medical parts supply monitoring from China for medical device
  • trade assurance medical parts supply monitoring from China for medical device
  • trade assurance medical parts supply monitoring from China for medical device

trade assurance medical parts supply monitoring from China for medical device

Euromicron Mould medical parts supply has been tested. For example, it has been checked whether flexible cords are effectively anchored to plugs and cord extension sockets.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
trade assurance medical parts supply monitoring from China for medical device-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

trade assurance medical parts supply monitoring from China for medical device-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




The management systems and quality control of Euromicron Mould medical parts supply mainly rely on our highly calibrated testing scales, computerized testing reports, state-of-the-art hardness testers.
All the raw materials of Euromicron Mould medical parts supply are sourced from reliable suppliers who are able to meet our quality requirements such as softness, air permeability, sweat absorption, and water resistance.
A wide range of tests on Euromicron Mould medical parts supply have been performed. These tests are conducted in accordance with IEC/EN 60335 parts 1 and 2.
Euromicron Mould medical parts supply is produced under different sophisticated workmanship. The pattern or grain will be manually carved with great delicacy and the board will be cut with high precision within the tolerance of 0.2mm.
The design of Euromicron Mould medical parts supply has been optimized. For example, the performance of insulation materials (mainly metals), plug compatibility, electromagnetic interference have been improved by our designers.
The offered product is equipped with a long service life and has reliable functions.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...