Euromicron Mould car moulding is manufactured only with high-quality materials and to achieve it, we have established a strict material selection specification. The product stands out with its excellent dimensional consistency2.
The product is well known for its convenience and good durability. The product is mainly exported to Europe and North America3.
Products from Euromicron Mould Engineering Limited are sold well to overseas market. It is manufactured to have stable chemical properties4.
If necessary, Euromicron Mould Engineering Limited can offer professional suggestions and comments on auto molding. Its quality has been certified under ISO14001:2004 and CE
◇◆ Product Features
According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.
To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.
The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.
To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.
As a professional car moulding manufacturer, Euromicron Mould Engineering Limited is highly valued among customers. 2.
Good market reputation and brand, a strong R&D team and innovative ideas for auto molding, solid Euromicron Mould Engineering Limited's future development. 3.
Euromicron Mould Engineering Limited will provide unwavering quality car moldings. Inquire online!