Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery plastic prototype electronicmmunication manufacturer for electronic components
quick delivery plastic prototype electronicmmunication manufacturer for electronic components

quick delivery plastic prototype electronicmmunication manufacturer for electronic components
  • quick delivery plastic prototype electronicmmunication manufacturer for electronic components
  • quick delivery plastic prototype electronicmmunication manufacturer for electronic components
  • quick delivery plastic prototype electronicmmunication manufacturer for electronic components
  • quick delivery plastic prototype electronicmmunication manufacturer for electronic components
  • quick delivery plastic prototype electronicmmunication manufacturer for electronic components

quick delivery plastic prototype electronicmmunication manufacturer for electronic components

This cover is part...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
quick delivery plastic prototype electronicmmunication manufacturer for electronic components-1
quick delivery plastic prototype electronicmmunication manufacturer for electronic components-2



◇◆ Product Features


quick delivery plastic prototype electronicmmunication manufacturer for electronic components-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

quick delivery plastic prototype electronicmmunication manufacturer for electronic components-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



The manufacturing of Euromicron Mould plastic prototype covers various process. The production process consists of pattern making, spreading, cutting, sewing and finishing. It can be used on go-kart crutches, caps, ATV axles, and electric winches
A wide range of tests is performed on Euromicron Mould plastic prototype. These tests encompass all of the ANSI/BIFMA, CGSB, GSA, ASTM standards related to furniture testing as well as mechanical testing of furniture components. It is well-protected against abrasion and corrosion
Different quality tests for Euromicron Mould plastic prototype have been carried out in the final production stage. These tests are an anti-aging test (ASTM D573), colorfastness to rubbing (AATCC 8), structural tearing strength or rigidity (SATRA TM30), etc. It is easy to replace thanks to the O.E. exact fit design
Euromicron Mould plastic prototype has a practical design. It is made taking into account the market this product is catering to on the basis of gender, age, social and economic segment. It helps the engine resist cracks and pinholes
Euromicron Mould plastic prototype must go through the required physical tests. They include abrasion testing, adhesion testing, colorfastness testing, dimensional stability testing, hardness testing, and thickness testing. It can be used on go-kart crutches, caps, ATV axles, and electric winches
Every detail of plastic prototype exhibits exquisite workmanship. It is highly resistant to temperature and heat
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...