quick delivery plastic enclosure product manufacturer for andon electronics

Company Advantages
1. Euromicron Mould plastic enclosure for electronic products goes through important manufacturing processes. They may be divided into several parts: the provision of working drawings, the selection&machining of raw materials, staining, spraying, and polishing. The pattern and color of the product can be changed during production
2. The product, with so many good characteristics, is adaptable to various applications. It is manufactured to have stable chemical properties
3. Its quality testing is strictly conducted by a professional QC team. Made of well-selected materials, the product has a long service life

Part Name:	Electronic connector
Part size:	18153mm
Raw Material:	NYLON+30%GF
Color:	RAL9005,Black
Mould Cavity No.:	16+16
Injection gate:	Cold runner
Surface finished:	Polishing #600
Core &Cavity steel:	1.2344, hardness 48~52HRC
Mold component standard:	DME or equivalent
Injection machine size:	120T
Cycle time:	18S
Mold life:	300000 shots
Customer:	AEC
Export:	USA

◇◆ Summary for project running

This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.

quick delivery plastic enclosure product manufacturer for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm. Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

quick delivery plastic enclosure product manufacturer for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.

Company Features
1. Euromicron Mould Engineering Limited has been concentrating on designing and manufacturing plastic enclosure for electronic products . With rich experience, we have been a reliable manufacturer to deliver high-quality products. All our technical staff are rich in experience for plastic enclosure .
2. All our electrical molding have conducted strict tests.
3. Euromicron Mould Engineering Limited has successfully got several patents for technology. Euromicron Mould values its work in terms of the value our customers added. Check now!

k******u

plastic enclosure is designed to bring great convenience for customers.

b******f

Good material of plastic enclosure makes good sale in Euromicron Mould Engineering Limited.

k******k

With features of plastic enclosure for electronic products and plastic enclosure for electronic products, plastic enclosure is the best choice for you.

j******p

We have special team to take charge of design for electrical molding.

t******p

As long as you make up your minds on electrical molding, we can provide feasible suggestions to pick the best one.

o******r

The product has stable physical properties in the specific conditions of temperature and pressure. Its physical properties are decided by its crystal structure.