Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery plastic enclosure molding manufacturer for andon electronics
quick delivery plastic enclosure molding manufacturer for andon electronics

quick delivery plastic enclosure molding manufacturer for andon electronics
  • quick delivery plastic enclosure molding manufacturer for andon electronics
  • quick delivery plastic enclosure molding manufacturer for andon electronics
  • quick delivery plastic enclosure molding manufacturer for andon electronics

quick delivery plastic enclosure molding manufacturer for andon electronics

Euromicron Mould Engineering Limited is one of important plastic enclosure production base.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
die casting mold, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the same category, die casting mold has outstanding advantages which are mainly reflected in the following points.
  • v s
Product Details
Euromicron's cnc service is processed based on the latest technology. It has excellent performances in the following details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce cnc service which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.
Company Advantages
1. plastic molding manufacturing is the ultimate product in plastic enclosure field.
2. The product has a long cycle life. The active materials feature strong stability and it is optimized in terms of the prevention of leaks.
3. The product is not easy to crack and warp. It is able to expand and contract flexibly to stand up the extremely high temperatures.
4. Safe shipment can be guaranteed for our plastic enclosure .


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
quick delivery plastic enclosure molding manufacturer for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

quick delivery plastic enclosure molding manufacturer for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited is one of important plastic enclosure production base.
2. we have successfully developed a variety of plastic prototype series.
3. Euromicron Mould Engineering Limited intends to create a new brand for plastic molding manufacturing and make a new market space. Contact us! The ultimate goal of our company is to make clients succeed with our dedication. Putting our clients first and gain support from them is what we strive to achieve. Contact us! We are striving to be the leader in the industry. At the present stage, we are going to expand our brand exposure. We will combine numerous marketing channels to attract our target customers, such as the official website, selling platforms, and social media, to truly immerse customers into our brand.
Certifications

 

 
Contact us
Environmental testing is one of the main steps in the production of Euromicron Mould plastic enclosure. Strict inspection is carried our to eliminate toxic substances such as mercury and lead. The product is CE certified for the European market
Most of the mechanical parts of Euromicron Mould plastic molding manufacturing have to be processed in a professional way. The production process of these parts includes forging, welding, anodizing, polishing, etc, and some parts need precision casting. The product is well used in many large engineering projects
As for the design of Euromicron Mould plastic enclosure, it is stylish. It adopts newer design concepts and follows the ongoing computer-assisted design trend. The Gost certificate has been obtained for the Russian market
Euromicron Mould plastic enclosure is carefully designed by considering many factors. For example, part tolerances, size limitations, materials performance, and operational efficiency factors have been taken into considerations. It can be customized according to customers' needs
Quality debugging will be carried out when Euromicron Mould plastic prototype is produced. The debugging aspects include parts' connection, configuration, structural stability, and other mechanical performance. More than 10,000 pcs have been delivered and installed
To ensure durability, our highly skilled QC professionals rigorously inspect the product. The product is analyzed and tested cautiously before packing
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...