Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  quick delivery plastic enclosure box customized for andon electronics
quick delivery plastic enclosure box customized for andon electronics

quick delivery plastic enclosure box customized for andon electronics

Part Name
Electronic connector
Part size
45*39.5*21mm
Raw Material
PA9T30GF
Color
RAL9005,Black
Mould Cavity No
1*4
Injection gate
Hot runner
Surface finished
VDI3400-33
Product Comparison
Euromicron carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce injection mold which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the industry, Euromicron's injection mold has the outstanding advantages which are mainly reflected in the following aspects.
  • v s
Company Advantages
1. Euromicron Mould plastic electrical enclosures is qualified. This includes meeting essential standards, showing regulatory compliance marks, and conforming to other regulations.
2. Our professional quality control team ensures that our products meet industry standards.
3. The product is of high quality and has passed international certification.
4. The non-porous material enables this product to be extremely hygienic and ideal for frequent uses without the worry of bacterial accumulation.
5. The product helps improve skin condition, improve people's appearance and empowers people with confident beauty.



◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited is a very successful listed company in the plastic enclosure box industry.
2. Euromicron Mould Engineering Limited has an experienced and a professional R&D team.
3. Euromicron Mould Engineering Limited's corporate culture needs continuous innovation and development on the basis of adhering to plastic electrical enclosures . Please contact. Euromicron Mould Engineering Limited always keep a cardinal principle of 'profession and promise' during business cooperation. Please contact. Upholding the working spirit of custom plastic enclosures electronics , Euromicron Mould provides the most convenient electronic housing . Please contact.
Chat Online 编辑模式下无法使用
Chat Online inputting...