Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery electronic parts products wholesale for electronic components
quick delivery electronic parts products wholesale for electronic components

quick delivery electronic parts products wholesale for electronic components
  • quick delivery electronic parts products wholesale for electronic components
  • quick delivery electronic parts products wholesale for electronic components
  • quick delivery electronic parts products wholesale for electronic components
  • quick delivery electronic parts products wholesale for electronic components
  • quick delivery electronic parts products wholesale for electronic components

quick delivery electronic parts products wholesale for electronic components

Extensive tests are carried out on Euromicron Mould electronic parts . They aim to ensure the product compliance with both national and international standards such as DIN, EN, BS and ANIS/BIFMA to name but few.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron can provide free technical services for customers and supply manpower and technical guarantee.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Extensive tests are carried out on Euromicron Mould electronic parts . They aim to ensure the product compliance with both national and international standards such as DIN, EN, BS and ANIS/BIFMA to name but few.
2. The quality of Euromicron Mould product highly conforms to established specification.
3. People can trust that it can directly contact with bare skin without causing any skin allergies or other skin-sensitive symptoms.


quick delivery electronic parts products wholesale for electronic components-1
quick delivery electronic parts products wholesale for electronic components-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
quick delivery electronic parts products wholesale for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

quick delivery electronic parts products wholesale for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Specialized in the production of electronic parts , Euromicron Mould Engineering Limited have gained a high popularity.
2. It is the introduction of highly advanced technology that guarantees the quality of plastic enclosure box.
3. We work with our suppliers to educate and motivate them to deliver higher sustainability options and standards and to understand sustainable travel behavior. We enforce the standards in our Supplier Code of Conduct with our manufacturing suppliers and review environmental practices during audits of such suppliers.
Related Products
Product Description
Product Name
15"True Flat Touch Screen POS Terminal
Memory
2GB (4GB or 8GB Is Optional)
Hard Disk
32G SSD (64G SSD 128G 256GSSD or 500G HDD optional)
Panel
capacitive touch (10 point)True Flat
Resolution
1024*768
CUP
Intel celeron J1900/i3/i5
Brightness
300cd/m2
Operation System
Win 7/Win 8/Win 10/Linux
Main Board
Baytrial Mother Board
Voltage
12V DC 5A
USB
6*USB(5*2.0,1*3.0)
Storage Temperature
-40~80℃
Operate Temperature
20~60℃
COM
3*RS232,4*RS232 is optional
Audio
Realtek ALC662 5.1 Channel HDA Codec ,Support MIC/Line-out Ports 1*Amplifier
Strorage
1*SATA 3Gbps+1*mSATA[3]
Ethernet
1*RealtekpCI-E NIC RTL8111E for 1000Mbps
True Flat 15"  Fanless All In One Touch Screen  POS
show details
Exhibition
Use Place
Related products
Packing & Delivery
Packing 
Company Profile
Contact Information
The design concept of Euromicron Mould overmolding electronics is comparatively mature in the industry. Materials used in artificial stone are up to European standards
Our electronic parts are made with overmolding electronics. KKR artificial stone boasts high cost-performance ratio
We develop Euromicron Mould overmolding electronics using hi-tech tools and equipment. KKR artificial stone is easy to install
Euromicron Mould plastic enclosure box is famous for its delicate and functional design. KKR artificial stone varies in color and type
It proves to be more efficient for Euromicron Mould to focus on the design of electronic parts. KKR artificial stone is exported to 107 countries
The multiple varies of plastic enclosure box design provides more convenience for the choices of customers. Advanced manufacturing technology is adopted for KKR artificial stone
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...