Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery electronic parts electronic supplier for andon electronics
quick delivery electronic parts electronic supplier for andon electronics

quick delivery electronic parts electronic supplier for andon electronics
  • quick delivery electronic parts electronic supplier for andon electronics
  • quick delivery electronic parts electronic supplier for andon electronics
  • quick delivery electronic parts electronic supplier for andon electronics
  • quick delivery electronic parts electronic supplier for andon electronics

quick delivery electronic parts electronic supplier for andon electronics

Euromicron Mould custom plastic enclosures has been designed by considering its systems. These systems include machine control system, PLC system, variable speed drive and servo system. Its third shielding layer ensures maximum avoiding of EMI and RFI
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
quick delivery electronic parts electronic supplier for andon electronics-1
quick delivery electronic parts electronic supplier for andon electronics-2



◇◆ Mold design


quick delivery electronic parts electronic supplier for andon electronics-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Euromicron Mould custom plastic enclosures is developed featuring humanized and intelligent. Integrating a variety of techniques, the design has taken operators' safety, machines' efficiency, running costs, and other factors into consideration. Its corrosion-resistant connectors can protect against external signal interference
Euromicron Mould custom plastic enclosures is manufactured with various sophisticated mechanical components. These components are specialized drills, piston, motors, rollers, and engines which are all delicately made. The pure copper conductors ensure the speed of the data
The tests for Euromicron Mould electronic parts are strictly carried out. These tests cover operation safety testing, reliability testing, electromagnetic compatibility testing, strength and stiffness testing, etc. Its corrosion-resistant connectors can protect against external signal interference
Euromicron Mould electronic parts needs to be tested in various aspects. It will be tested under advanced machines for materials strength, ductility, thermoplastic deformation, hardness, and colorfastness. It has been extensively used in various high-definition video and audio equipment
Euromicron Mould custom plastic enclosures has a very beautiful surface. The surface treatment process is carried out in strict accordance with the highest packaging and printing standards. By using this product, users can enjoy better results on the screen
The operation of our custom plastic enclosures is very simple, even inexperienced worker can learn it in short time. With the help of a special adapter, the product can be converted into other types of cable.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...