Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

quick delivery electrical molding electrommunication customized for andon electronics

quick delivery electrical molding electrommunication customized for andon electronics

Quick delivery electrical molding electrommunication customized for andon electronics

Part Name
socket
Part size
52*52*59mm
Raw Material
ABS
Color
Grey
Mould Cavity No
1*2
Injection gate
Cold runner with sub gate
Surface finished
VDI3400-33
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The manufacturing of Euromicron Mould custom plastic enclosures covers various process. The production process consists of pattern making, spreading, cutting, sewing and finishing. It is produced in the large-scale workshops, making mass production possible
2. Using this product is a great way to reduce carbon footprint. It can cut emission by saving energy use in people's daily life. The product is easy to assemble and maintain
3. The product features uniform quality of air circulation. The atmospheric temperature and relative humidity have been homogenized to keep it reasonably uniform. Made of well-selected materials, the product has a long service life
4. The product is able to resist abrasions. It can withstand abrasion caused by scraping or rubbing which will affect its original physical property. The product goes through several inspections before delivery with defects removed
5. The product is breathable enough. The fabric is porous structural and specially treated to have a good air permeability strong water absorption. The product is capable of withstanding high torque


quick delivery electrical molding electrommunication customized for andon electronics-1
quick delivery electrical molding electrommunication customized for andon electronics-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


quick delivery electrical molding electrommunication customized for andon electronics-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



Company Features
1. Euromicron Mould Engineering Limited has a group of electrical molding specialist team.
2. Client-oriented was the focus throughout the evolution of Euromicron Mould brand. Call now!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...