Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery electrical molding by supplier for andon electronics
quick delivery electrical molding by supplier for andon electronics

quick delivery electrical molding by supplier for andon electronics
  • quick delivery electrical molding by supplier for andon electronics
  • quick delivery electrical molding by supplier for andon electronics

quick delivery electrical molding by supplier for andon electronics

The product is environmentally friendly. The ammonia refrigerant used breaks down quickly in the environment, minimizing potential environmental impact.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron's die casting mold is processed based on the latest technology. It has excellent performances in the following details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron's die casting mold is commonly praised in the market due to good materials, fine workmanship, reliable quality, and favorable price.
Company Advantages
1. The compound of Euromicron Mould electrical molding has gone through a standard procedure. For example, a rheometer test is carried out on every single batch of compound.
2. The product has good deformation resistance. It has been treated with the cold stamping process at room temperature to improve its cracking proof capacity.
3. The product is environmentally friendly. The ammonia refrigerant used breaks down quickly in the environment, minimizing potential environmental impact.
4. Euromicron Mould Engineering Limited will provide the most appropriate plan and solutions of electrical molding for customers.


quick delivery electrical molding by supplier for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
quick delivery electrical molding by supplier for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

quick delivery electrical molding by supplier for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. As culture developed, Euromicron Mould was developing its innovative capability to make electrical molding .
2. We have a professional marketing team. Our team has extensive experience in expanding our products in both developed and low-cost regions around the world.
3. Unremitting efforts will be made by Euromicron Mould Engineering Limited to build a stronger image of Euromicron Mould. Get price! We sincerely hold the tenet of plastic enclosure for electronic products in mind when conducting business. Get price! In order to satisfy our customers, Euromicron Mould Engineering Limited will work hard to do every possible thing. Get price!
Euromicron Mould electrical molding has a unique design. Our designers experiment with various materials, often mixing textures, textiles or even incorporating multimedia elements into its design. There will be no stability issues with this product
Euromicron Mould plastic enclosure for electronic products has a good design. Inspiration for its design is derived from many sources like current and forward-thinking developments in the fashion marketplace. It is available with the progress tracking through the Performance Monitor 5
The design of Euromicron Mould plastic enclosure for electronic products bases on various factors. They are ergonomic functionality, space layout and styles, materials characteristics, and so on. Manufactured by advanced machines such as Taiwan JY-2025 automatic lathes and 20T-125T stamping equipment, its quality is guaranteed
Numbers of critical tests are carried out on Euromicron Mould electrical molding. They include structure safety testing (stability and strength) and surfaces durability testing (resistance to abrasion, impacts, scrapes, scratches, heat, and chemicals). It can be placed in a living room, den, or media room
The design of Euromicron Mould electrical molding is human-oriented. It is carried out by designers who have a deep understanding of plantar pressure distribution and different arch types. The ergonomics of this product is optimal
The product features proper sizes. The external toe cap length and the length from heel to toe are all typically measured by inspectors. It comes with a strong and tough frame
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...