Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  quick delivery custom plastic box products supplier for andon electronics
quick delivery custom plastic box products supplier for andon electronics

quick delivery custom plastic box products supplier for andon electronics
  • quick delivery custom plastic box products supplier for andon electronics
  • quick delivery custom plastic box products supplier for andon electronics
  • quick delivery custom plastic box products supplier for andon electronics

quick delivery custom plastic box products supplier for andon electronics

Part Name:
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron pays great attention to product quality and strives for perfection in every detail of products. This enables us to create fine products.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Under the guidance of market, Euromicron constantly strives for innovation. cnc service has reliable quality, stable performance, good design, and great practicality.
Product Comparison
die casting mold has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. die casting mold's outstanding advantages are as follows.
Company Advantages
1. The production of Euromicron Mould injection molded electronics meets the international standards.
2. While sustaining injection molded electronics , custom plastic box can also represent the spirit of Euromicron Mould.
3. Euromicron Mould Engineering Limited is perceived as a vibrant and engaged generators of custom plastic box .


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
quick delivery custom plastic box products supplier for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

quick delivery custom plastic box products supplier for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is a large integrated enterprise specialized in custom plastic box research, exploitation, manufacture and production.
2. Every piece of plastic prototype has to go through material checking, double QC checking and etc.
3. Euromicron Mould is going to increase its international fluency in plastic enclosure market. Ask! Euromicron Mould is devoted to becoming a professional company that can serve customers very well. Ask! Euromicron Mould Engineering Limited aims to maintain long-term and high-speed development. Ask!
Euromicron Mould plastic enclosure is constructed in accordance with international electrical safety standards. It follows the requirements of IEC, EMC, CE and so on.
Euromicron Mould custom plastic box is manufactured by experts of high-precision optical components. They master innovative and proprietary optical component manufacturing technologies.
The production of Euromicron Mould plastic prototype covers the following stages: mechanical structure design, control system design, metal materials preparation, flame-cutting, welding, powder coating, and assembly.
The design of Euromicron Mould plastic prototype follows a basic set of principles. These principles include rhythm, balance, focal point & emphasis, color, and function.
Euromicron Mould plastic prototype is done through several basic processes. It will be cut, sewn, fiber washed, dyed and decorated.
Our highly specialized experts ensure the product to meet high level of quality.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...