Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap


quick delivery communication processor products customized for electronic components

quick delivery communication processor products customized for electronic components

Quick delivery communication processor products customized for electronic components

Part Name
Electronic connector
Part size
Raw Material
Mould Cavity No
Injection gate
Hot runner
Surface finished
Get Latest Price
Get the latest price
Quantity Needed:
Company Advantages
1. The unique design makes Euromicron Mould overmolding electronics stand out among similar products. It is produced in the large-scale workshops, making mass production possible
2. This product is used by more and more people and has broad application prospects. The surface of the product adopts scratch-resistant coating
3. The data show thatcommunication processor has high performance such as overmolding electronics . Its quality has been certified under ISO14001:2004 and CE
4. Being qualified with communication processor enables Euromicron Mould to win more trust from more customers. Supported by the world-class manufacturing management system, it is of stable quality
5. communication processor has the merit of overmolding electronics as compared with other similar products. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda

quick delivery communication processor products customized for electronic components-1
quick delivery communication processor products customized for electronic components-2

◇◆ Product parameters

Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots

A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
quick delivery communication processor products customized for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

quick delivery communication processor products customized for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.

Company Features
1. With the spirit of continuous R&D, Euromicron Mould Engineering Limited has developed into a highly developed enterprise. Euromicron Mould Engineering Limited has advanced equipment, large scale, and high quality which could guarantee and organize batches production.
2. Euromicron Mould Engineering Limited insists on continuous investment in R&D of products in order to enhance its technological advantages.
3. In order to improve the core competitiveness, the technical center of Euromicron Mould has fully learnt the advantages of advanced technology. A mutual goal helps Euromicron Mould to develop better. Please contact.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...