Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

qiantu intake Euromicron Mould Brand injection auto parts

qiantu intake Euromicron Mould Brand injection auto parts

qiantu intake Euromicron Mould Brand injection auto parts
  • qiantu intake Euromicron Mould Brand injection auto parts
  • qiantu intake Euromicron Mould Brand injection auto parts

qiantu intake Euromicron Mould Brand injection auto parts

Product Name
Auto door plastic part
Product size
717*119*50mm
Material
PC+ABS
Cavity
L+R
Cycle time
45S
Customer
Nissan
Export
Janpan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
With the pursuit of perfection, Euromicron exerts ourselves for well-organized production and high-quality injection mold.Euromicron produces cnc service in strict accordance with national quality standards. We can guarantee the products are characterized by wear resistance and good obdurability, and long-lasting great performance.Closely following the market trend, Euromicron uses advanced production equipment and manufacturing technology to produce injection mold. The product receives favors from the majority of customers for the high quality and favorable price.
Company Advantages
1. car moulding is produced by high-quality material exported from abroad. It is manufactured to have stable chemical properties
2. The high quality, excellent performance, and long service life make the product stand out in the market. It is produced in the large-scale workshops, making mass production possible
3. Euromicron Mould Engineering Limited has set up oversea warehouse to achieve sufficient and timely supply of auto molding. Its design is supported by the professional project engineers who follow up the specific progress


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited specializes in the manufacture and supply of car moulding.
2. auto molding is manufactured using proven and cost-effective production processes.
3. Euromicron Mould plans to be the dominant car moldings supplier who provides the best customer service. Check now!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...