General Manager :
Manufacturing Director :
We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.
This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.
1)100% brand new;
2)2 Function+1 Cosmetic Test
After-sales (Return policy):
We will exchange new one for free if there is any defects, after you get the part.
1)Goods will be delivered by DHL, UPS, FedEx, EMS, TNT, HKEMS methods
15"True Flat Touch Screen POS Terminal
2GB (4GB or 8GB Is Optional)
32G SSD (64G SSD 128G 256GSSD or 500G HDD optional)
capacitive touch （10 point）True Flat
Intel celeron J1900/i3/i5
Win 7/Win 8/Win 10/Linux
Baytrial Mother Board
12V DC 5A
3*RS232,4*RS232 is optional
Realtek ALC662 5.1 Channel HDA Codec ,Support MIC/Line-out Ports 1*Amplifier
1*RealtekpCI-E NIC RTL8111E for 1000Mbps