Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  >  OEM ODM products made by injection moulding source now for businessman Euromicron Mould
OEM ODM products made by injection moulding source now for businessman Euromicron Mould

OEM ODM products made by injection moulding source now for businessman Euromicron Mould

Product Name
Door handle
Product size
183*37*30mm
Material
PC+ABS
Cavity
1*2
Cycle time
41S
Customer
Volkswagen
Export
Germany
Application Scope
injection mold produced by Euromicron is mainly used in the following fields.Euromicron has been engaged in the production of cnc service for many years and has accumulated rich industry experience. We have the ability to provide comprehensive and quality solutions according to actual situations and needs of different customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Details
With a focus on product quality, Euromicron strives for quality excellence in the production of cnc service.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron's cnc service is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.
Company Advantages
1. Compliance with recognized safety standards is necessary for Euromicron Mould products made by injection moulding to be recognized. These can be in the form of test reports from recognized testing laboratories.
2. The manufactured car moldings has such merits of products made by injection moulding as to be used in plastic injection molding products area.
3. As a leading enterprise, Euromicron Mould is committed to offering a wide range of car moldings .
4. Euromicron Mould Engineering Limited is well-funded with adequate car moldings supply and thoughtful service.


This is a door handle of automobile. The product needs electroplating. The finish is high gloss. The material is PC+ABS with electroplating grade.


◇◆ Product Features


The mold was built in 2005. It is two-cavity mold. Cold runner system. The part was ejected out by round ejector pin and sleeve ejector. The finish of the cavity is very important. The steel  NAK80 is used in the mold. The polishing grade is A3 (Ra0.032μm). It has high requirements not only for polishing itself but also for surface smoothness, smoothness and geometric accuracy. In order to obtain high-quality polishing effect, the most important thing is to have high-quality polishing tools and accessories such as whetstone, sandpaper and diamond grinding paste. And the choice of polishing process depends on the surface condition after the early processing, such as mechanical processing, edm, grinding and so on.

Rough polished is the first step in polishing. After milling, edm, grinding and other processes of the surface can be selected in the speed of 35,000 to 40000rpm rotary surface polishing machine or ultrasonic grinding machine for polishing. Commonly used methods include using Φ3 mm in diameter, WA# 400 wheels to remove white edm layer. Then it is grinded by hand, and the strip is added with kerosene as lubricant or coolant. The general order of use is #180~#240~#320~#400~#600~#800~#1000. Semi-polishing is second step. It mainly use sandpaper. The Numbers of sandpaper are: #400~#600~#800~#1000~#1200~#1500. Fine polishing is the final step. Fine polishing mainly USES diamond abrasive paste. The usual grinding order to get diamonds to mix together with polishing wheels is to get 9 microns (#1800) to 6 microns (#3000) to 3 microns (#8000).

Diamond abrasive paste and polishing wheels can be used to remove the hair marks on #1200 and #1500 sandpaper. The carpeting and diamond paste are then polished to the tune of 1 microns to 1/2 microns to 1 microns to 1 quarter microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns. The polishing process to be over 1 microns (including 1 microns) to the accuracy requirements can be carried out in a clean polishing room at the die processing workshop. For more sophisticated polishing an absolutely clean space is required. Dust, smoke, dandruff and saliva can all be discarded after hours of work to obtain a highly precise polished surface.



Company Features
1. Euromicron Mould has set up a quality management system to win the favors of customers.
2. Most products from Euromicron Mould Engineering Limited have already been awarded patents.
3. Customers' satisfactions is the best momentum for Euromicron Mould Engineering Limited. Get quote! Euromicron Mould Engineering Limited will continue to listen to costumer, understand their needs, and make our car moldings products perfect. Get quote! Euromicron Mould Engineering Limited promotes entrepreneurship and dare to take risks during the development. Get quote!
Chat Online 编辑模式下无法使用
Chat Online inputting...