Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  OEM ODM car moulding injection renovation solutions for merchant
OEM ODM car moulding injection renovation solutions for merchant

OEM ODM car moulding injection renovation solutions for merchant

Product Name
Auto tank
Product size
495*76*83mm
Material
PA66+30%GF
Cavity
1*2
Cycle time
41S
Customer
Mercedes Benz
Export
Germany
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of OEM ODM car moulding injection renovation solutions for merchant
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron collects problems and demands from target customers all over the country through deep-going market research. Based on their needs, we keep improving and updating the original service, so as to achieve the maximum extent. This enables us to establish a good corporate image.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. The specifications of car moulding accord with the standards.
2. The product is not likely to accumulate too much heat. Its powerful cooling system is designed to maintain the proper temperature of mechanical parts, allowing it to have good heat dissipation.
3. The product stands out for its stable operation. Since it is mainly controlled by microcomputers, it can run stably without any break.
4. The product is becoming more and more popular with many demands for its outstanding features.


OEM ODM car moulding injection renovation solutions for merchant-1
OEM ODM car moulding injection renovation solutions for merchant-2



◇◆ Product Features


OEM ODM car moulding injection renovation solutions for merchant-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


OEM ODM car moulding injection renovation solutions for merchant-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

OEM ODM car moulding injection renovation solutions for merchant-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

OEM ODM car moulding injection renovation solutions for merchant-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould Engineering Limited is professional and experienced in developing and manufacturing automobile parts manufacturing . We are known in the market for providing high-quality products.
2. Euromicron Mould Engineering Limited adopts high technology to greatly improve quality and output of car moulding .
3. We truly embrace sustainable development. We proactively reduce production waste, increase resource productivity, and optimize material usage. Safety is our top priority. We aim to sustain the highest standards of product, process, and occupational safety throughout our whole business. We are customer-focused: we measure ourselves and our actions through the lens of our customers. We build strong relationships with customers and deliver quality products and services. We do not tolerate unethical behavior by our associates anywhere, and we will take all necessary steps to ensure compliance with our Code of Conduct and all applicable laws.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...