Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  OEM ODM car door molding auto renovation solutions for merchant
OEM ODM car door molding auto renovation solutions for merchant

OEM ODM car door molding auto renovation solutions for merchant

Product Name
Seat belt buckle
Product size
145*55*33mm
Material
ABS
Cavity
1*4
Cycle time
38S
Customer
Honda
Export
Japan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of OEM ODM car door molding auto renovation solutions for merchant
Company Advantages
1. Euromicron Mould custom injection molding companies is manufactured & designed using innovative tools & equipment. The product stands out with its excellent dimensional consistency
2. This well-designed product achieves fantastic lighting effects, which is not only good for people's eyes but also for the mood. The surface of the product adopts scratch-resistant coating
3. The product is not susceptible to the damage caused by overload and overcurrent. It is built with a heating element protection system which can effectively guard against malfunction. The product is mainly exported to Europe and North America


OEM ODM car door molding auto renovation solutions for merchant-1
OEM ODM car door molding auto renovation solutions for merchant-2



◇◆ Product Features


OEM ODM car door molding auto renovation solutions for merchant-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


OEM ODM car door molding auto renovation solutions for merchant-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

OEM ODM car door molding auto renovation solutions for merchant-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

OEM ODM car door molding auto renovation solutions for merchant-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Skilled design and R&D engineers have built distinctive cultural knowledge of car door molding for Euromicron Mould.
2. We strictly take steps to formalize our environmental practices. We work to foster a sustainable development along our entire value chain in line with our economic, environmental and social responsibilities.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...