Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  OEM ODM automobile 24 neuwagen component source now for businessman
OEM ODM automobile 24 neuwagen component source now for businessman

OEM ODM automobile 24 neuwagen component source now for businessman

Product Name
Seat belt buckle
Product size
145*55*33mm
Material
ABS
Cavity
1*4
Cycle time
38S
Customer
Honda
Export
Japan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of OEM ODM automobile 24 neuwagen component source now for businessman
Company Advantages
1. In order to offer safe dehydrated foods, Euromicron Mould plastic injection molding products is produced conforming to high levels of hygienic standards. This production process is inspected strictly by the quality control department who all think highly of food quality. The product is processed by about 400 staff with many years of experience
2. There is a very broad development prospect of this product owing to these features. The product is capable of withstanding high torque
3. Systematic quality control: it is the key control factors in the whole production process. From development to the shipment, the quality of this product is under the whole control of the quality team. With the development of science and technology, the product is upgraded quickly
4. The quality of the product stays in line with current regulation and standard. Its quality has been certified under ISO14001:2004 and CE


OEM ODM automobile 24 neuwagen component source now for businessman-1
OEM ODM automobile 24 neuwagen component source now for businessman-2



◇◆ Product Features


OEM ODM automobile 24 neuwagen component source now for businessman-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


OEM ODM automobile 24 neuwagen component source now for businessman-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

OEM ODM automobile 24 neuwagen component source now for businessman-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

OEM ODM automobile 24 neuwagen component source now for businessman-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Euromicron Mould Engineering Limited works with famous brands with resource advantages.
2. Always aim high in quality of automobile 24 neuwagen .
3. We are committed to acting in an environmentally responsible way using best practice and best available materials in all our activities. Call now!
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...