Euromicron Mould injection molding manufacturing companies is manufactured adopting raw materials which are of high quality and durable. It does not contain any toxic material and meets the requirements of environmental protection2.
Euromicron Mould Engineering Limited's technical service and development teams can help provide guidance on material selection. The product is processed by about 400 staff with many years of experience3.
The product is highly resistant to impact and vibration. It is built with a strong housing that can prevent damage to the electric components. Its quality has been certified under ISO14001:2004 and CE4.
The product is features reliability and stability. Its electrical leakage risks have been already removed and it can work smoothly. One-stop solutions are offered for the product, including design, manufacturing, and assembly5.
The product is easy to clean. Its materials feature high density and airtightness, which not allows dirt or dust to enter into its pores. It is produced in the large-scale workshops, making mass production possible
◇◆ Product Features
According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.
To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.
The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.
To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.
Being a production base of auto molding in China, Euromicron Mould Engineering Limited has run properly over the years. Our factory has advanced machines. They have the efficiency to help us cut down on unnecessary costs, reduce the margin for human error, and streamline the production process.2.
We have gathered a group of product development experts. They are always developing new products according to market trends or buyers tendency, which enables us to meet the needs of domestic and foreign markets.3.
We boast a responsive team of project management. They have a wealth of manufacturing experience in the industry and work with our customers to ensure that the project runs reliably and accurately. Our service on automotive molding production is very reliable among domestic and foreign customers. Call!