loading

Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  OEM ODM auto body molding citroen source now for trader
OEM ODM auto body molding citroen source now for trader

OEM ODM auto body molding citroen source now for trader

Product Name
Seat belt buckle
Product size
145*55*33mm
Material
ABS
Cavity
1*4
Cycle time
38S
Customer
Honda
Export
Japan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of OEM ODM auto body molding citroen source now for trader
Company Advantages
1. Euromicron Mould injection molded parts has to go through both physical and mechanical properties tests including its stiffness, thickness, tear resistance, and inflatable performance. Its quality has been certified under ISO14001:2004 and CE
2. People can set assured that this product will not easily get pilling after it is frequently washed. People will love its quality. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda
3. The professional QC team secures the quality of this product. It is produced in the large-scale workshops, making mass production possible
4. The product is of high quality and can withstand rigorous quality and performance tests. The product is easy to assemble and maintain


OEM ODM auto body molding citroen source now for trader-1
OEM ODM auto body molding citroen source now for trader-2



◇◆ Product Features


OEM ODM auto body molding citroen source now for trader-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


OEM ODM auto body molding citroen source now for trader-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

OEM ODM auto body molding citroen source now for trader-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

OEM ODM auto body molding citroen source now for trader-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Euromicron Mould Engineering Limited is one of the leading manufacturers of auto body molding . We continue to grow and offer customers the very best in products, service, and prices since established.
2. All the projects Euromicron Mould Engineering Limited is involved with are handled with absolute professionalism in its factory.
3. The corporate mission of Euromicron Mould Engineering Limited is to injection molded parts . Get info!
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...