Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  > 

molding precision connector corporation Euromicron Mould Brand electronic parts supplier

molding precision connector corporation Euromicron Mould Brand electronic parts supplier

molding precision connector corporation Euromicron Mould Brand electronic parts supplier
  • molding precision connector corporation Euromicron Mould Brand electronic parts supplier
  • molding precision connector corporation Euromicron Mould Brand electronic parts supplier
  • molding precision connector corporation Euromicron Mould Brand electronic parts supplier

molding precision connector corporation Euromicron Mould Brand electronic parts supplier

Part Name
Gateway
Part size
175*136*32mm
Raw Material
ABS+PC
Color
RAL9010,Whit
Mould Cavity No
1*1
Injection gate
Hot runner with pin point gate
Surface finished
Mirror Polishing
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's injection mold is widely used in multiple industries and fields.Euromicron is dedicated to providing professional, efficient and economical solutions for customers, so as to meet their needs to the greatest extent.Euromicron has completed a reliable quality assurance system and an effective quality assurance network to ensure that cnc service are of high quality.
Product Details
We are confident about the exquisite details of die casting mold.Euromicron's cnc service have the advantages of wear resistance, corrosion resistance, rare scale formation and long service life. They have been proved to be used normally for a long time.Euromicron pays great attention to integrity and business reputation. We strictly control the quality and production cost in the production. All these guarantee die casting mold to be quality-reliable and price-favorable.
Company Advantages
1. The production process of Euromicron Mould precision molded plastics is accelerated and streamlined. It does not contain any toxic material and meets the requirements of environmental protection
2. Its quality is strictly checked by quality inspection department from the raw material to the shipment process. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda
3. Euromicron Mould Engineering Limited has a long standing reputation for its remarkable electronic parts. The complete after-sales service system is rendered for the product to maximize customer value


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited is a high-tech company which mainly specializes in electronic parts.
2. With strong capital and independent R&D team, Euromicron Mould Engineering Limited is a dynamic and innovative team in plastic enclosure field.
3. Euromicron Mould Engineering Limited has the power to shape a bright future with plastic prototype together with you. Inquire now!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...