Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

injection auto parts nissan stereo Euromicron Mould Brand

injection auto parts nissan stereo Euromicron Mould Brand

injection auto parts nissan stereo Euromicron Mould Brand
  • injection auto parts nissan stereo Euromicron Mould Brand
  • injection auto parts nissan stereo Euromicron Mould Brand

injection auto parts nissan stereo Euromicron Mould Brand

Product Name
Auto door plastic part
Product size
717*119*50mm
Material
PC+ABS
Cavity
L+R
Cycle time
45S
Customer
Nissan
Export
Janpan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
With a focus on product quality, Euromicron pursues perfection in every detail.Euromicron's cnc service have high compatibility, good wear and corrosion resistance, and long service life. The products can be widely used in a variety of equipment, and their performance will not suffer as time goes on.Euromicron pays great attention to integrity and business reputation. We strictly control the quality and production cost in the production. All these guarantee die casting mold to be quality-reliable and price-favorable.
Product Comparison
Euromicron provides diversified choices for customers. injection mold is available in a wide range of types and styles, in good quality and in reasonable price.Euromicron makes full use of modern quality management tools to carry out strict quality control. The cnc service are guaranteed to be of high quality and good safety.After being improved greatly, Euromicron's injection mold is more advantageous in the following aspects.
  • v s
Company Advantages
1. Euromicron Mould injection auto parts is produced under the international production standards. The surface of the product adopts scratch-resistant coating
2. Due to the implementation of a complete quality management system, the product meets the most stringent quality standards. Its quality has been certified under ISO14001:2004 and CE
3. After several years of development, Euromicron Mould Engineering Limited now owns a formidable technology power and its products are sold well at home and abroad. Fast shipment is guaranteed for the product to improve customer satisfaction
4. Euromicron Mould Engineering Limited makes it easy for you to find plastic injection mold making that you can trust. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould enjoys a dominant position in the market.
2. In order to improve the reputation of Euromicron Mould, it is necessary to utilize new advanced technologies.
3. Euromicron Mould Engineering Limited is committed to creating a car moulding with injection auto parts for its customers. Get more info!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...