Electrical Molding, Electronic Connector Product By Precision Injection Molding

Product Information
Customer Reviews

Product Comparison

Euromicron carries out strict quality monitoring and cost control on each production link of cnc service, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.On the basis of traditional crafts, Euromicron constantly introduces advanced production equipment and management concept. Besides, we have professional quality inspection personnel. We pay more attention to product quality than to output.Compared with other products in the same category, cnc service has the following major features.

Company Advantages
1. electronic parts from Euromicron Mould Engineering Limited is really exquisite and of precision molded plastics. Its structure proves to be firm and stable
2. The product is of high quality and works exceptionally well. It keeps its appearance as bright and clean as a new one after long-term use
3. The quality of the product is totally assured by the adoption of the strict quality management system. Its appearance is stylish and creates a stereoscopic sense
4. After many times of QC checking, all delivered plastic enclosure are in high quality. Its quality has been certified under ISO14001:2004 and CE
5. Technology progress of Euromicron Mould Engineering Limited relies on plastic prototype R&D capabilities. It is produced in the large-scale workshops, making mass production possible

This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.

It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.

◇◆ Mold design

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.

Company Features
1. Euromicron Mould Engineering Limited runs with its core product system: electronic parts.
2. As a high-tech company, Euromicron Mould makes the best plastic enclosure.
3. Euromicron Mould Engineering Limited's goal is to provide better and more suitable industrial products and services. Inquiry!

Favorable rate

100%

Buyer impression