Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  high productivity plastic enclosure for electronic products supplier for electronic components
high productivity plastic enclosure for electronic products supplier for electronic components

high productivity plastic enclosure for electronic products supplier for electronic components

Part Name
Electronic connector
Part size
45*39.5*21mm
Raw Material
PA9T30GF
Color
RAL9005,Black
Mould Cavity No
1*4
Injection gate
Hot runner
Surface finished
VDI3400-33
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron effectively improves after-sales service by carrying out strict management. This ensures that every customer can enjoy the right to be served.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. The stylish Euromicron Mould plastic enclosure for electronic products is designed by our design experts.
2. The product has the quality that meets and even exceeds the industry standards as well as specifications.
3. The product has developed rapidly and met the market demands.
4. The product is accepted with broad application prospects.



◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited is devoted to developing new products, most of which are pioneers in the China market.
2. Euromicron Mould develops the technological innovation to promote plastic enclosure box research.
3. The Euromicron Mould brand is designed to provide quality service to our customers. Contact! Euromicron Mould Engineering Limited always prioritizes customer needs. Contact! All employees of Euromicron Mould adhere to a proactive work attitude and provide satisfactory and honest services to all customers at any time. Contact!
Chat Online 编辑模式下无法使用
Chat Online inputting...