Euromicron Mould plastic molding manufacturing is checked by conducting on-site testing including marking and vulcanization tests for rubber outsoles, rocking tests, fabric testing and verification of special features like waterproofing and stain resistance. Its appearance is stylish and creates a stereoscopic sense2.
The assurance of a good customer service will do a great help to the popularity of Euromicron Mould. Its manufacturing meets the international quality standards3.
The products have passed strict quality examination and inspection before they leave the factory. It is produced in the large-scale workshops, making mass production possible4.
This product is widely appreciated by customers, with excellent performance and longer service life. The complete after-sales service system is rendered for the product to maximize customer value5.
Strict quality standards have been set during the inspection process to ensure high quality products. The product is mainly exported to Europe and North America
|Part Name:||Electronic connector|
|Mould Cavity No.:||16+16|
|Injection gate:||Cold runner |
|Surface finished: ||Polishing #600|
|Core &Cavity steel:||1.2344, hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||120T|
|Mold life:||300000 shots|
◇◆ Summary for project running
There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.
Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.
Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.
Euromicron Mould Engineering Limited has trained production professionals in the plastic enclosure industry. We have a responsible R&D team. They continually monitor and analyzes market trends. Their extensive R&D activities let the company quickly develop products with new functions that meet emerging customer needs.2.
Our factory has advanced manufacturing equipment. In addition to providing better security features for our own employees, they can also bring faster speed and higher productivity.3.
We possess an advanced and well-established infrastructure. It is equipped with all the necessary facilities needed for better manufacture and supply of products and services. Euromicron Mould Engineering Limited's never-ending quest to fulfill and nurture the outside and possible needs of our customers in a comprehensive and forward-looking method. Call now!