Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high productivity plastic enclosure by customized for andon electronics
high productivity plastic enclosure by customized for andon electronics

high productivity plastic enclosure by customized for andon electronics
  • high productivity plastic enclosure by customized for andon electronics
  • high productivity plastic enclosure by customized for andon electronics
  • high productivity plastic enclosure by customized for andon electronics

high productivity plastic enclosure by customized for andon electronics

Part Name...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould plastic enclosure is developed by the R&D team complying with the philosophy of ergonomics. The team strives to keep up with the needs of the stores' counter locations and layout. It is characterized by a very good surface finish
2. Due to the huge economic benefits, this product is in high demand in the market. Its design is supported by the professional project engineers who follow up the specific progress
3. High dimensional accuracy is the prominent point of the product. Advanced cutting tools and techniques are applied to ensure its dimension precision. The pattern and color of the product can be changed during production
4. The product features high production. Once the design parameters and specification have been entered into this product, it consistently executes huge tasks and affords flexible scalability. It is manufactured to have stable chemical properties


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
high productivity plastic enclosure by customized for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

high productivity plastic enclosure by customized for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould has been highly commented for its advanced production line by more customers. Equipped with a complete set of quality control technology, [企业简称] ensures the good quality of the products.
2. As society developed, Euromicron Mould has been stressing the importance of a high-quality plastic enclosure .
3. Euromicron Mould has advanced technical equipment to improve the quality of electronic parts . It has been widely recognized that Euromicron Mould now is a specialist in electronic housing industry. Inquire online!
Euromicron Mould electronic housing is manufactured under supporting machinery automation technology. It is produced by integrating electronic information technology, automatic control technology, and mechanical automation technology. It is extremely popular in the markets of Europe, North America, and Asia
Euromicron Mould electronic parts has been tested to meet the requirements of basic standards. These standards cover parts tolerances&deformation, size stability, specification consistency, and function realization. It can be printed with numbers, names, data codes, logos, or other specific information
Euromicron Mould custom plastic cases for electronics is manufactured by ordinary machining methods, including fixed edge, lathe machining, drilling, chipping, CNC machining, honing processing, etc. Its working panel is coated with a photo-sensitive epoxy-based ink, which can ensure its insulation resistance
Euromicron Mould custom plastic cases for electronics is manufactured in mechanical rooms that are dedicated to mechanical equipment. It will go through stamping, CNC machining, and surface treating such as coating and lacquering. Its solder mask can be offered with green, blue, white, black, yellow, and red colors
Euromicron Mould plastic enclosure is a design integrating intelligence. Automatic control and automation detection technologies that are highly efficient are adopted into its design.
This product features excellent mechanical strength and reliable electrical contact, which are guaranteed by its finely component soldering.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...