Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high productivity electrical molding electronics manufacturer for andon electronics
high productivity electrical molding electronics manufacturer for andon electronics

high productivity electrical molding electronics manufacturer for andon electronics
  • high productivity electrical molding electronics manufacturer for andon electronics
  • high productivity electrical molding electronics manufacturer for andon electronics
  • high productivity electrical molding electronics manufacturer for andon electronics
  • high productivity electrical molding electronics manufacturer for andon electronics

high productivity electrical molding electronics manufacturer for andon electronics

The design of Euromicron Mould electrical molding adopts the advanced technologies and software which include computer-aided design (CAD), computer-aided modeling (CAM), etc. The product has been certified under FDA and CNAS
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


high productivity electrical molding electronics manufacturer for andon electronics-1
high productivity electrical molding electronics manufacturer for andon electronics-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


high productivity electrical molding electronics manufacturer for andon electronics-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



The production process of Euromicron Mould electrical molding is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. It is not likely to contain any carcinogenic substances like BPA and PAH(polycyclic aromatic hydrocarbon
The production of Euromicron Mould electrical molding is rigorously undertaken by the factory itself, inspected by the third-party authorities. Especially the inner parts, such as food trays, are required to pass the tests including chemical release testing and high-temperature withstanding capacity. The product is thick and sturdy enough to hold heavy things
Euromicron Mould electrical molding is completed by our professional architects and engineers who consider every project carefully such as the location, topography, climate, and culture. The use of this product significantly helps reduce white plastic pollution
Euromicron Mould electrical molding is carried out by our designers who aim to maintain and improve the lifestyle of customers by delivering the most effective and innovative wellness sauna product. It can be coated with PE, PLA or PBS
The hardware components of Euromicron Mould electrical molding have been tested by a third-party testing organization, passing the FCC, CE and ROHS safety certification. There are no mold spots on the product
It is thoroughly inspected to ensure zero defects. Made from bagasse and wheat straw fiber, the product is sustainable
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...