Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

high productivity communication processor molding customized for andon electronics

high productivity communication processor molding customized for andon electronics

High productivity communication processor molding customized for andon electronics

Product Name
Electronic connector
Product size
35*29.5*26mm
Material
PA9T30GF
Cavity
1*4
Cycle time
40S
Customer
Bitron
Export
Italy
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron pays great attention to product quality and strives for perfection in every detail of products. This enables us to create fine products.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron insists on the use of high-quality materials and advanced technology to manufacture die casting mold. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.
Product Comparison
Well-chosen in material, fine in workmanship, excellent in quality and favorable in price, Euromicron's injection mold is highly competitive in the domestic and foreign markets.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Supported by advanced technology, Euromicron has a great breakthrough in the comprehensive competitiveness of injection mold, as shown in the following aspects.
Company Advantages
1. Euromicron Mould communication processor has gone through a wide range of tests. They are some necessary tests include tensile strength testing, flexing testing, slip resistance testing, and thermal comfort testing.
2. Excellent performance: the product is superior in performance, which could be seen in the test reports and the users' comments. This makes it highly cost-effective and widely recognized.
3. The products are of high quality and stable performance, and are well received by customers.
4. The product is safe and secure for people during operation. People can rest assured that potential safety hazards are not possible to occur.


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
high productivity communication processor molding customized for andon electronics-1
high productivity communication processor molding customized for andon electronics-2



◇◆ Mold design


high productivity communication processor molding customized for andon electronics-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. Euromicron Mould is widely accepted by its customers from all over the world mainly for its communication processor .
2. Strict quality control system enables Euromicron Mould Engineering Limited to implement comprehensive monitoring during the whole process.
3. We give our customers a better understanding and confidence in their electrical molding related projects. Inquire! Euromicron Mould Engineering Limited adheres to the service tenet of providing wholehearted service to customers. We are deeply trusted by customers. Inquire! Euromicron Mould Engineering Limited will tap into the our whole strength to provide you with the best. Inquire!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...