Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high efficiency electronic parts product supplier for andon electronics
high efficiency electronic parts product supplier for andon electronics

high efficiency electronic parts product supplier for andon electronics
  • high efficiency electronic parts product supplier for andon electronics
  • high efficiency electronic parts product supplier for andon electronics

high efficiency electronic parts product supplier for andon electronics

Eco-friendly materials are used in the producing of Euromicron Mould electronic parts. This product is ready to run with no assembly needed
Get the latest price
Quantity Needed:
Pieces
E-mail:


high efficiency electronic parts product supplier for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
high efficiency electronic parts product supplier for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

high efficiency electronic parts product supplier for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



The color scheme of plastic housing for electronics makes it more harmonious and more colorful. It has powerful motors that drive and climb faster
Euromicron Mould electronic parts adopts the smooth and high-efficiency manufacturing process. Its strong and high-efficiency motor provides a strong driving force
Euromicron Mouldplastic housing for electronics has an innovative and practical design which is well-received in the market. Featuring light in weight, it is portable for fishing, hiking, or long journey
The design idea of Euromicron Mould plastic housing for electronics keeps up with the modern aesthetic trend. Its electronic board is waterproof and dustproof
Euromicron Mould electronic parts is designed based on market demands. Its speed can be easily adjusted and controlled
This product has a combination of superior performance and long life compared to competing products. Its electronic board is waterproof and dustproof
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...