Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high efficiency electrical molding electronics wholesale for electronic components
high efficiency electrical molding electronics wholesale for electronic components

high efficiency electrical molding electronics wholesale for electronic components
  • high efficiency electrical molding electronics wholesale for electronic components
  • high efficiency electrical molding electronics wholesale for electronic components
  • high efficiency electrical molding electronics wholesale for electronic components
  • high efficiency electrical molding electronics wholesale for electronic components
  • high efficiency electrical molding electronics wholesale for electronic components

high efficiency electrical molding electronics wholesale for electronic components

Euromicron Mould custom plastic enclosures manufactured by our professional engineers are made to run on natural refrigerant agents rather than traditional synthetics agents used as refrigerants which is the key factor in harmful pollutant reduction.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
With wide application, injection mold can be used in the following aspects.Euromicron has many years of industrial experience and great production capability. We are able to provide customers with quality and efficient one-stop solutions according to different needs of customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. Euromicron Mould custom plastic enclosures manufactured by our professional engineers are made to run on natural refrigerant agents rather than traditional synthetics agents used as refrigerants which is the key factor in harmful pollutant reduction.
2. electrical molding brings you much more convenience for custom plastic enclosures .
3. This product is able to carry around people's stuff in an organized manner. It can easily store things which people wish to carry around while traveling.


high efficiency electrical molding electronics wholesale for electronic components-1
high efficiency electrical molding electronics wholesale for electronic components-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
high efficiency electrical molding electronics wholesale for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

high efficiency electrical molding electronics wholesale for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited holds temporarily a leading position in electrical molding field.
2. The quality for our plastic prototype is so great that you can definitely rely on.
3. Euromicron Mould Engineering Limited regards 'The Best Service Enterprise of Global Professional electronic parts ' as its development vision. Inquire! In order to deal with the changing future, Euromicron Mould will need to assess the situation timely. Inquire! Working on supplying the finest communication processor and professional service will facilitate Euromicron Mould to move forward. Inquire!
The quality of Euromicron Mould communication processor is guaranteed by a series of tests. It has gone through inspection on its seam force, tensile strength, fiber stiffness, fiber resilience, etc.
Euromicron Mould communication processor is guaranteed by quality assessment. Its manufacturing workmanships such as cutting, sewing, and dying, and some chemical agents used such as dyestuff and anti-bacterial agents are required to pass relevant tests.
During the production, Euromicron Mould plastic prototype is under rigorous inspection and control. It is required to pass the eco-textile testing which means no azo colorants and heavy metals are included.
Relevant tests will be conducted once the Euromicron Mould electronic parts is produced. It will be tested on the dyeing quality and workmanship to meet the mandatory standard: Basic technical specifications for safety of textiles.
Various quality tests are required in the production of Euromicron Mould electronic parts. It will be tested on the issue of dyeing saturability, abrasion resistance, fastness to UV and heat, and weaving strength by the QC team.
It has a sturdy and durable fabric that keeps the brightness and shape to guarantee a complete appearance of the bedroom and a happy night's sleep.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...