Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high efficiency custom plastic box andon wholesale for andon electronics
high efficiency custom plastic box andon wholesale for andon electronics

high efficiency custom plastic box andon wholesale for andon electronics
  • high efficiency custom plastic box andon wholesale for andon electronics
  • high efficiency custom plastic box andon wholesale for andon electronics
  • high efficiency custom plastic box andon wholesale for andon electronics

high efficiency custom plastic box andon wholesale for andon electronics

This product is highly anti-bacterial. Its fabrics will form a strong hydrophobic shield that effectively prevents the build-up of bacteria and germs under wet conditions. Fast shipment is guaranteed for the product to improve customer satisfaction
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould injection moldable plastics is developed blending in various disciplines. Knowledge such as computer science, information technology, automatic control technology, and mechanical engineering are considered and adopted in its development. The product stands out with its excellent dimensional consistency
2. Euromicron Mould Engineering Limited pays close attention to customer needs and service experience. The product goes through several inspections before delivery with defects removed
3. This product is highly anti-bacterial. Its fabrics will form a strong hydrophobic shield that effectively prevents the build-up of bacteria and germs under wet conditions. Fast shipment is guaranteed for the product to improve customer satisfaction
4. The product is hygienic. During the production process, advanced technology for odor and bacteria management has been used to prevent mold and smell. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
5. It is somewhat anti-bacterial. Its fabrics have been treated in order to counteract the spreading of bacteria and the associated smells. The product can be applied in many industries, such as the automobile, house appliance, and medical industry


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
high efficiency custom plastic box andon wholesale for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

high efficiency custom plastic box andon wholesale for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is equipped with many technical talents.
2. We have high business and ethical standards and do not tolerate bribery or corruption in any form. To support this, we've developed a Statement of Business and Ethics Code which sets out the guiding principles by which we all operate.
Environmental testing is one of the main steps in the production of Euromicron Mould injection moldable plastics. Strict inspection is carried our to eliminate toxic substances such as mercury and lead. Imported materials and accessories are used in product manufacturing
Most of the mechanical parts of Euromicron Mould injection moldable plastics have to be processed in a professional way. The production process of these parts includes forging, welding, anodizing, polishing, etc, and some parts need precision casting. The product performs well in program control and material use reduction
As for the design of Euromicron Mould custom plastic box, it is stylish. It adopts newer design concepts and follows the ongoing computer-assisted design trend. The quality is reliable and the service life is long
Euromicron Mould custom plastic box is carefully designed by considering many factors. For example, part tolerances, size limitations, materials performance, and operational efficiency factors have been taken into considerations. It is well recognized by more than 5000 customers
Quality debugging will be carried out when Euromicron Mould custom plastic box is produced. The debugging aspects include parts' connection, configuration, structural stability, and other mechanical performance. The product is CE certified for the European market
To ensure durability, our highly skilled QC professionals rigorously inspect the product. The Gost certificate has been obtained for the Russian market
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...