Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  high efficiency communication processor electronic customized for andon electronics
high efficiency communication processor electronic customized for andon electronics

high efficiency communication processor electronic customized for andon electronics
  • high efficiency communication processor electronic customized for andon electronics
  • high efficiency communication processor electronic customized for andon electronics
  • high efficiency communication processor electronic customized for andon electronics

high efficiency communication processor electronic customized for andon electronics

Part Name:
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
high efficiency communication processor electronic customized for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

high efficiency communication processor electronic customized for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




The design of Euromicron Mould plastic housing for electronics involves several stages. They are trend studies, fabric and accessory research, sample making, etc. It is renowned for excellent load adaptability
The tests for Euromicron Mould plastic housing for electronics have been conducted. These tests include wiring of main control cabinets, including PLC wiring and operator stations. Its surface has been treated with oxidation to enhance its wear resistance
The production process of Euromicron Mould plastic housing for electronics covers the following stages. They are materials receiving, materials cutting, molding, component fabricating, parts assembling, and finishing. All these processes are conducted by professional technicians with years of experience in upholstery.
The manufacture of Euromicron Mould communication processor is divided into a few aspects. They are mainly materials preparation, mechanical components' cleaning, cutting, milling, welding, and parts assembly. The product has overload and over/under-pressure protection
Euromicron Mould plastic housing for electronics has passed a series of security tests. It has been tested the electric strength test, also known as high-voltage insulation test, water-resistant test, and tests for potential overload and statics. Its temperature-controlled cooling fan helps reduce energy consumption
The product has stable performance, long storage life and reliable quality. Applied in a photovoltaic system, it is absolutely pollution-free
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...