Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

grid motorcycle lamp harness injection auto parts Euromicron Mould Brand

grid motorcycle lamp harness injection auto parts Euromicron Mould Brand

grid motorcycle lamp harness injection auto parts Euromicron Mould Brand

Product Name
Auto tank
Product size
495*76*83mm
Material
PA66+30%GF
Cavity
1*2
Cycle time
41S
Customer
Mercedes Benz
Export
Germany
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Choose 's injection mold for the following reasons.
Product Comparison
Compared with other same kind of products, cnc service produced by has the following advantages and features.
Company Advantages
1. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda. injection auto parts is specially designed to plastic injection mold making and so on for further production.
2. With the development of science and technology, the product is upgraded quickly. The car moulding,injection moulding products can run in manual or automatic mode..
3. It is characterized by a very good surface finish. injection molded parts auto molding,injection molding manufacturers is designed to provide the highest levels of injection molding services and injection molding automotive for injection molded plastic parts..




◇◆ Product Features


The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Engaged in manufacturing car moulding, Euromicron Mould Engineering Limited wins customers by superior quality and low price.
2. By applying traditional and modern technology, the quality of auto molding is superior than similar type of products.
3. Customers can be totally assured of our quality and after-sale service for car moldings. Get more info!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...