Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould trade assurance coagulation analyser ge for trader
Euromicron Mould trade assurance coagulation analyser ge for trader

Euromicron Mould trade assurance coagulation analyser ge for trader
  • Euromicron Mould trade assurance coagulation analyser ge for trader
  • Euromicron Mould trade assurance coagulation analyser ge for trader
  • Euromicron Mould trade assurance coagulation analyser ge for trader

Euromicron Mould trade assurance coagulation analyser ge for trader

Euromicron Mould medical equipment parts adopts high quality semiconductor materials and different impurities, resulting in clear color light from the LED. The product stands out with its excellent dimensional consistency
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould medical equipment parts adopts high quality semiconductor materials and different impurities, resulting in clear color light from the LED. The product stands out with its excellent dimensional consistency
2. Being less likely to wrinkle, this product tends to be an easier care option. And it is machine-washable to accommodate a busy lifestyle. It is produced in the large-scale workshops, making mass production possible
3. One of the product's advantage is that it has the function of tensile strength. The structure of the fabric is completely tightened and the fibers are finely woven to enhance strength. The product goes through several inspections before delivery with defects removed
4. The product is known for its durability. It is able to withstand a given number of cycles and maintain its performance after it runs for a long time. Its manufacturing meets the international quality standards


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould trade assurance coagulation analyser ge for trader-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould trade assurance coagulation analyser ge for trader-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Company Features
1. With years of expertise in developing, designing, and manufacturing coagulation analyser , Euromicron Mould Engineering Limited has received a good reputation in the industry. Our factory not only has a complete set of production equipment but also the factory does well in the equipment accessories supply for backup use, so as to ensure uninterrupted production.
2. We are powered by a team of manufacturing experts. They have accumulated years of experience and are working hard to push China manufacturing by providing the highest level of products.
3. Our engineering team works closely with our customers. They come from a diverse background, creating innovative product solutions during the design phase and throughout the entire manufacturing process. Euromicron Mould Engineering Limited insists the business purpose of 'First Class Design, First Class Manufacture, First Class Service'. Get an offer!
coagulation analyser we produced is characterized by its coagulation analyser.
coagulation analyser has a good performance due to its materials having the merits including coagulation analyser.
medical equipment parts is produced by safe and environmentally-friendly raw material.
There are different types of coagulation analyser for our customer's choice.
Taking coagulation analyser as its background, medical equipment parts is characterized by coagulation analyser.
coagulation analyser is considered as the most promising coagulation analyser because of its coagulation analyser.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...