Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould top quality medical injection manufacturer for trader
Euromicron Mould top quality medical injection manufacturer for trader

Euromicron Mould top quality medical injection manufacturer for trader
  • Euromicron Mould top quality medical injection manufacturer for trader
  • Euromicron Mould top quality medical injection manufacturer for trader
  • Euromicron Mould top quality medical injection manufacturer for trader

Euromicron Mould top quality medical injection manufacturer for trader

Product N...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould top quality medical injection manufacturer for trader-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould top quality medical injection manufacturer for trader-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Euromicron Mould medical injection is designed by our experts bringing the latest concepts into the designing process. It has passed the tests performed by the National Electrical Control and Distribution Equipment Quality Supervision Testing Center
The raw materials used in the production of Euromicron Mould medical injection are of premium quality. Adopting PVC as one of the main materials, it has good stability and safety
With the assistance of skilled professionals, the production of Euromicron Mould medical injection is carried out according to the principles of lean production. It conforms to the standards of America, Japan, Germany, etc
The new type of Euromicron Mould medical injection designed by our experts is very attractive and practical. The non-metal part of the product is non-toxic, which allows it to be recycled easily
medical injection is built using standard materials procured from trusted vendors of the market. It is widely used in the fields of computers, instrumentation, home appliances, electronics, railways, and so on
All defects of the product have been accurately detected and then removed, guaranteeing consistent quantity. Packed with 5-layer corrugated paper, it is totally safe during transportation
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...