Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould sturdy construction plastic mold design request for quote for home application
Euromicron Mould sturdy construction plastic mold design request for quote for home application

Euromicron Mould sturdy construction plastic mold design request for quote for home application
  • Euromicron Mould sturdy construction plastic mold design request for quote for home application

Euromicron Mould sturdy construction plastic mold design request for quote for home application

Euromicron Mould plastic mold design goes through careful and sincere planning. Its design comprises of an ideal blend of art, aesthetics, creativity, and so forth. Hand-tufted mattress is good enough that could be rolled and compressed in a box
Get the latest price
Quantity Needed:
Pieces
E-mail:


Molding process parameters and process analysis of TV shell material


Molding process parameters

-- The molding process parameters of plastic parts mainly include temperature, pressure and time.
-- Temperature injection molding process needs to control the temperature of the barrel temperature, nozzle temperature and mold temperature.
(1) the selection of the temperature of the barrel should ensure that the plastics are well plasticized and can be injected without any trouble It causes the plastic to break down.
(2) the selection of nozzle temperature material barrel and nozzle temperature shall be compatible with other process conditions. Barrel and nozzle
The effect of temperature on the forming condition and the physical and mechanical properties of the plastic parts is very significant.
(3) the mold temperature has a great influence on the internal performance and performance quality of the plastic parts.
Mold temperature according to whether plastic parts crystallization, plastic parts size and structure requirements.

Euromicron Mould sturdy construction plastic mold design request for quote for home application-1
Pressure in injection molding process includes plasticizing pressure and injection pressure, both of which directly affect the plasticizing of plastics and the quality of plastic parts.

(1) the plasticizing pressure in the injection process varies with the design of plastic rods, the quality requirements of plastic parts and the types of plastic parts.
(2) the injection pressure depends on the type of injection molding machine, mold structure, wall thickness of plastic parts, type of plastic parts and injection molding process.

The time of a single injection molding cycle includes injection time (mold filling time and pressure maintaining time), mold closing cooling time and other time (mold opening, mold release, mold coating, insert placement, mold closing time, etc.).

(1) the filling time in production is 3-5s.
The pressure holding time of injection time is large, usually about 20 ~ 120s.
Before the weld solidification at the gate, the length of the holding time has a direct impact on the size accuracy of the plastic parts, while that at the gate has no effect after condensation.
The holding time shall be subject to the time with the smallest contraction fluctuation range of the plastic part.
(2) the cooling time depends on the thickness of the plastic parts, their thermal and crystalline properties, and the mold temperature.
The cooling time is about 30 ~ 120s.
Too long cooling time will make it difficult to unform complex plastic parts.
Injection molding process control factors: temperature, pressure and time, all need to be based on the type of plastic, plastic parts thickness and shape and mold structure to appropriate selection.



Comprehensive tests are carried out on Euromicron Mould plastic mold design. These tests help establish product compliance to standards such as ANSI/BIFMA, CGSB, GSA, ASTM, CAL TB 133 and SEFA. Each spring is sealed in a strong fiber bag to prevent mould or insects effectively
The design of Euromicron Mould plastic mold design has taken into account many factors. These factors include biomechanical comfort (plantar pressure), force distribution, fire resistance ability, and slip resistance.
The design of Euromicron Mould plastic mold design relies on different industrial cutting-edge techs. CAD pattern design tech, 2D/3D printing tech, and 3D digital human foot model collection tech have all adopted for the design. JLH mattresses have been exported to over 106 countries and regions including Europe, America, etc
Quality performance tests for Euromicron Mould plastic mold design will be finished at the final stage. They include rubbing resistance tests, tensile strength tests, colorfastness, and anti-bacterial tests. Manufactured by strict quality control, each mattress is highly recommended
The assessment of Euromicron Mould plastic mold design quality and performance is a mandatory step. The product will be checked for breathability, seam, stitch strength, colorfastness, stretchability, and so on. JLH Mattress offers the professional OEM and ODM service for you
Strict quality inspection ensures the quality of products. JLH products have passed CFR 1633 and BS 7177
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...