Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould stereo auto parts company source now for merchant
Euromicron Mould stereo auto parts company source now for merchant

Euromicron Mould stereo auto parts company source now for merchant
  • Euromicron Mould stereo auto parts company source now for merchant
  • Euromicron Mould stereo auto parts company source now for merchant

Euromicron Mould stereo auto parts company source now for merchant

The design of Euromicron Mould automobile parts manufacturing stands out in the market. It is designed by the designers who are very acquainted with practical tech accessory and has a deep insight into the phone markets. It does not contain any toxic material and meets the requirements of environmental protection
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The design of Euromicron Mould automobile parts manufacturing stands out in the market. It is designed by the designers who are very acquainted with practical tech accessory and has a deep insight into the phone markets. It does not contain any toxic material and meets the requirements of environmental protection
2. The development of Euromicron Mould Engineering Limited benefits the people in the surrounding communities. Supported by the world-class manufacturing management system, it is of stable quality
3. The product can stand up strong disinfectants. Its specially coated metal materials make it effectively withstand disinfection environments. The product stands out with its excellent dimensional consistency
4. The product features an easy operation. It has a relatively simple operating system combining a powerful processing flow and provides simple operation instruction. Company logo can be printed on the surface of the product
5. The product stands out for its stable operation. Since it is mainly controlled by microcomputers, it can run stably without any break. The product is processed by about 400 staff with many years of experience


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould stereo auto parts company source now for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Assisted by the high quality staff, Euromicron Mould enjoys a good reputation among the market. Euromicron Mould Engineering Limited is technologically leading the development of auto parts company field.
2. The Euromicron Mould must adhere to the development of technological innovation.
3. Euromicron Mould is a brand centered on the use of innovative technology methods. Euromicron Mould Engineering Limited has always been focused on the professional production of car door molding . Get quote!
Euromicron Mould Engineering Limited uses car door molding technology effectively maximize the service life of auto parts company. It only takes up the space of one outlet
auto parts company has advanced performance index with automobile parts manufacturing design. Adopting the LED source light, it features energy consumption
Intelligent design, high quality materials and precision manufacture ensure car door molding have a long service life. The product has been exported to the USA, Japan, Taiwan, etc
All car door molding may be the same, but automobile parts manufacturing make us take the lead.The shape of this product can be customized according to needs
Good material of automobile parts manufacturing makes good sale in Euromicron Mould Engineering Limited. Made of non-toxic and safe plastic material, it can be used in the baby room
This product is naturally dust mite resistant and anti-microbial, which prevents the growth of mold and mildew, and it's also hypoallergenic and resistant to dust mites. The product provides the right amount of glare-free light to guide users in the dark
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...