|Mould Cavity No.:||1*2|
|Injection gate:||Cold runner with sub gate|
|Core &Cavity steel:||1.2344,hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||180T|
|Mold life:||100000 shots|
This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.
Waterproof Plastic Hand-held Housing Electronic Enclosure And Junction Box