Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould stb electrical molding manufacturer for andon electronics
Euromicron Mould stb electrical molding manufacturer for andon electronics

Euromicron Mould stb electrical molding manufacturer for andon electronics
  • Euromicron Mould stb electrical molding manufacturer for andon electronics
  • Euromicron Mould stb electrical molding manufacturer for andon electronics
  • Euromicron Mould stb electrical molding manufacturer for andon electronics
  • Euromicron Mould stb electrical molding manufacturer for andon electronics
  • Euromicron Mould stb electrical molding manufacturer for andon electronics

Euromicron Mould stb electrical molding manufacturer for andon electronics

Euromicron Mould plastic enclosure for electronic products is manufactured under standardized production conditions.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • With an excellent logistics management system, Euromicron is committed to providing efficient delivery for customers, so as to improve their satisfaction with our company.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic enclosure for electronic products is manufactured under standardized production conditions.
2. The experiments reveal that plastic enclosure for electronic products is much more practical, it can be extended to any other kinds of electrical molding .
3. Since this product is naturally hypoallergenic, it’s perfectly suitable for people who are born with sensitive skin or allergies.
4. It is a fact that people enjoy the moment better in their lives since this production is comfortable, safe, and attractive.


Euromicron Mould stb electrical molding manufacturer for andon electronics-1
Euromicron Mould stb electrical molding manufacturer for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould stb electrical molding manufacturer for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould stb electrical molding manufacturer for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. As an internationally famous brand, Euromicron Mould is committed to quality and service of electrical molding .
2. We have an excellent design team. The designers are experienced enough to timely understand the evolving needs of customers and the dynamic trends in the market.
3. We stick to sustainable development. We ensure proper sustainable management by reducing wastes generated and reuse materials as possible. Integrity will become the heart and soul of our company's culture. In business activities, we will never cheat our partners, suppliers, and clients no matter what. We will always work hard to realize our commitment to them. We have adopted an efficient process to achieve our sustainability goals. We mainly reduce greenhouse gas emissions, energy consumption, solid landfill waste, and water consumption.
Euromicron Mould plastic enclosure for electronic products has a secured source of raw materials. The stitches of this product are uniform and neat
electrical molding design determines the final form of electrical molding from Euromicron Mould Engineering Limited. It acts as an expression of women's tastes
Euromicron Mould plastic enclosure for electronic products is designed in accorance with the basic production standard. This product is not easy to shrink
Euromicron Mould electrical molding is designed by the concerted effort of strong R&D team and design team.
In order to be the leading electrical molding manufacturers, our experts also focuses on its design. The stitches of this product are uniform and neat
With the assistance of plastic enclosure for electronic products, plastic enclosure for electronic products has gained its popularity in the market. This product stands out for its excellent breathability
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...