Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould siemens plastic prototype customized for electronic components

Euromicron Mould siemens plastic prototype customized for electronic components

Euromicron Mould siemens plastic prototype customized for electronic components

Part Name
Gateway
Part size
175*136*32mm
Raw Material
ABS+PC
Color
RAL9010,Whit
Mould Cavity No
1*1
Injection gate
Hot runner with pin point gate
Surface finished
Mirror Polishing
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron attaches great importance to customers. We devote ourselves to providing high-quality products and professional services.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. The combination of custom plastic enclosures materials makesplastic prototype very stable with a long service life.
2. This product has low chemical emissions. It has been tested and analyzed for more than 10,000 individual VOCs, namely volatile organic compounds.
3. The product is distinguished by high reliability. It has passed the stability test which is intended to check whether it's easy to fall or tip.
4. With its abrasion resistance property, this product allows for many times of washing or a lot of people's movements.
5. This product can help relieve the feet and toe problems. It offers enough wearing comfort for those with bunions, ingrown toenails, knee osteoarthritis, etc.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould siemens plastic prototype customized for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould siemens plastic prototype customized for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited is China's major plastic prototype production base.
2. custom plastic box is the life of an enterprise which needs the full concentration and meticulous of employees during the work.
3. Euromicron Mould Engineering Limited is a manufacturer who aims to function as one of the most popular electrical molding business. Inquire! Euromicron Mould Engineering Limited hopes to develop into an exceptionally influential enterprise to make communication processor . Inquire! We adhere to the business philosophy of quality and innovation for our branded Electrommunication. Inquire! Euromicron Mould will adhere to the firm belief of becoming an international electronic parts exporter. Inquire!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...