Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics
Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics

Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics
  • Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics
  • Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics
  • Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics

Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics

We have professional QC department to test strictly plastic enclosure for electronic products .
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The wonderful color of our plastic enclosure for electronic products is big plus.The product stands out with its excellent dimensional consistency
2. Euromicron Mould Engineering Limited is proud of its longstanding leadership in innovation and quality. Fast shipment is guaranteed for the product to improve customer satisfaction
3. Compared with other , plastic enclosure for electronic products brings features of . Made of well-selected materials, the product has a long service life


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould siemens plastic enclosure for electronic products customized for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. We have professional QC department to test strictly plastic enclosure for electronic products .
2. Euromicron Mould now always holds the firm idea that customer satisfication is in the first place. Contact us!
Euromicron Mould plastic enclosure for electronic products has such design that strikes the perfect balance between practicality and beauty. Made of natural materials that are degradable, it is eco-friendly
With the changes of the society, customers also pay more attention to the design of plastic enclosure for electronic products. It protects the goods from damage, squeezing, and shaking during transport
Except the quality assurance, Euromicron Mould Engineering Limited also attaches great importance to the design of plastic enclosure for electronic products. This product can retain the freshness of food, such as coffee, tea, and snacks
Euromicron Mould plastic enclosure for electronic products is manufactured using state-of-the-art machinery and the best quality materials.
The design style of plastic enclosure for electronic products expresses the details thoroughly. It can be recycled and reused
plastic enclosure for electronic products is applied to plastic enclosure for electronic products for its properties of plastic enclosure for electronic products. It makes the goods or gifts look more upscale
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...