Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould siemens medical parts manufacturer for medical device
Euromicron Mould siemens medical parts manufacturer for medical device

Euromicron Mould siemens medical parts manufacturer for medical device
  • Euromicron Mould siemens medical parts manufacturer for medical device
  • Euromicron Mould siemens medical parts manufacturer for medical device
  • Euromicron Mould siemens medical parts manufacturer for medical device

Euromicron Mould siemens medical parts manufacturer for medical device

Product N...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron insists on the use of high-quality materials and advanced technology to manufacture die casting mold. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Supported by advanced technology, Euromicron has a great breakthrough in the comprehensive competitiveness of die casting mold, as shown in the following aspects.
Application Scope
Euromicron's injection mold can be used in multiple industries.Euromicron is committed to providing customers with high-quality cnc service as well as one-stop, comprehensive and efficient solutions.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. The quality test for Euromicron Mould medical equipment spare parts suppliers must be conducted. It has to go through a check for start-up and pause performance before delivery.
2. The product is highly chemical resistant. It is treated with a protective chemical coating or with protective paintwork to prevent corrosion.
3. The product features high-temperature resistance. The fiberglass materials used are not easy to become deformed when exposed to strong sunlight.
4. 'Persist in providing the best service' is the Euromicron Mould Engineering Limited's philosophy.


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould siemens medical parts manufacturer for medical device-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould siemens medical parts manufacturer for medical device-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Company Features
1. Euromicron Mould Engineering Limited is an experienced and reliable manufacturer and supplier of medical parts and is highly prestigious in product design and manufacture.
2. Euromicron Mould provides the latest technology to exceed customer and business needs.
3. Upholding the working spirit of medical equipment spare parts suppliers, Euromicron Mould provides the most convenient medical molding . Check now! For the consistent development of Euromicron Mould, our medical device parts must be produced adapting to the trend of information. Check now! Taking medical parts supply as the fundamental value orientation is essential for Euromicron Mould. Check now!
Euromicron Mould medical parts crafted by our professional team is in its finest workmanship. LG hologram sticker can be used for documents protection, brand identity, advertising, etc
Euromicron Mould medical parts is the result of many years of development and refinement of production methods and technology. LG hologram sticker has an anti-counterfeiting function
Euromicron Mould medical parts is manufactured by a professional R&D team with great efforts to provide the best products. LG hologram stickers are highly suitable for labeling well-regarded brands
Euromicron Mould medical parts is fabricated using optimum quality raw materials and pioneering technology. LG stickers are available in various shape and sizes
Euromicron Mould medical device parts is designed by professional designers with rich industry experience. LG hologram stickers are highly suitable for labeling well-regarded brands
The product can handle well under high temperatures. It exhibits high retention of properties and low volume swell when subjected to high temperatures. LG stickers are characterized by fine workmanship and good durability
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...