Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould shell medical device parts manufacturer for hospital
Euromicron Mould shell medical device parts manufacturer for hospital

Euromicron Mould shell medical device parts manufacturer for hospital
  • Euromicron Mould shell medical device parts manufacturer for hospital
  • Euromicron Mould shell medical device parts manufacturer for hospital
  • Euromicron Mould shell medical device parts manufacturer for hospital

Euromicron Mould shell medical device parts manufacturer for hospital

Product N...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:Semi-automatic Coagulation Analyzer
Product size:228*219*57mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:200T
Cycle time:36S
Product Take out way:Manipulator/Cupula
Cooling system: cold runner
Cavity and core steel:718H
Mold base standard: LKM
Terminal Customer:Maccura 


◇◆ Product Features
Euromicron Mould shell medical device parts manufacturer for hospital-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.

Euromicron Mould shell medical device parts manufacturer for hospital-2

The back shell mold is fine nozzle mold or single hot nozzle mold can meet the customer requirements.
In the mold processing, the front mold processing is very important, the front mold surface can meet, relatively flat, in the design of the front mold as far as possible to make the prominent part of the front mold insert, in order to facilitate the shape of the small R Angle can be directly processed by 3 axis or 5 axis machining center molding, if you can't do it, you should do the whole graphite electrode Electric Discharge Machining molding.




The development of Euromicron Mould medical device parts adopts different advanced technologies. It is developed under the enlightenment of energy keeping and ultra-quiet technologies. Our Inflatable Water Park achieves to a high level in terms of quality and safety
Euromicron Mould medical device parts is generally tested under a simulated environment. These tests may include fatigue testing for electronic components and thermal insulation performance testing for materials. Our water parks designed for foreign customers are all unique and very successful
The electric performance test of Euromicron Mould medical device parts is conducted at the quality inspection stage. The main electrical performance index such as capacity, internal resistance, lifespan, and short circuit protection will be tested by the QC team. For anchor rings, we always use 316 stainless steel which last longer in water
The design of Euromicron Mould medical device parts is professional. It involves circuit design (usually via computer drafting software), printed circuit design, and housing design. Our Inflatable Water Park are safe and harmless
Euromicron Mould medical device parts has been tested. It has achieved a BS 5234-2: 1992 severe duty rating which is conducted by an accredited laboratory. Our water parks designed for foreign customers are all unique and very successful
The product is resistant to flaking. After withstanding a certain sharp temperature change or collision, it will not easily fail. Our Inflatable Water Park are safe and harmless
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...