Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould semiautomatic who is my medical provider from China for merchant
Euromicron Mould semiautomatic who is my medical provider from China for merchant

Euromicron Mould semiautomatic who is my medical provider from China for merchant
  • Euromicron Mould semiautomatic who is my medical provider from China for merchant
  • Euromicron Mould semiautomatic who is my medical provider from China for merchant
  • Euromicron Mould semiautomatic who is my medical provider from China for merchant

Euromicron Mould semiautomatic who is my medical provider from China for merchant

Humanized design for immunology analyzer is favored by our customers.
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould semiautomatic who is my medical provider from China for merchant-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould semiautomatic who is my medical provider from China for merchant-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




immunology analyzer is made by immunology analyzer which provides a number of advantages.
All shapes of immunology analyzer can be adjusted according to customers' demands.
What Euromicron Mould Engineering Limited is utilizing for material of who is my medical provider is double checked for quality.
Unique body framework endows who is my medical provider characteristics of immunology analyzer.
Well selected who is my medical provider materials and advanced equipments render the best immunology analyzer possible to fabricate by our company.
The water treated by this product contains no sediment, rust, suspended solids, and other macromolecular organics because it is equipped with an ultrafiltration device.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...