Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould revolutionary medical association logo supplier for businessman
Euromicron Mould revolutionary medical association logo supplier for businessman

Euromicron Mould revolutionary medical association logo supplier for businessman
  • Euromicron Mould revolutionary medical association logo supplier for businessman
  • Euromicron Mould revolutionary medical association logo supplier for businessman
  • Euromicron Mould revolutionary medical association logo supplier for businessman

Euromicron Mould revolutionary medical association logo supplier for businessman

The performance of Euromicron Mould medical association logo is guaranteed in the production processes. Its stability, durability, and low energy consumption performance are all guaranteed by every sophisticated workmanship. It has at least a 5-year service life
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould revolutionary medical association logo supplier for businessman-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould revolutionary medical association logo supplier for businessman-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Before delivery, the mechanical parts of Euromicron Mould automated coagulation analyser has been tested. These parts include gears, bearings, fasteners, springs, seals, couplings, and so forth. The hollow-fiber filter UF membrane with activated carbon offers a high flow rate
Euromicron Mould medical association logo is professionally designed. It is completed by our designers with an understanding of required and operating parameters (e.g., temperature, pressure, continuity, voltage, and amperage, etc). The surface of the product features scratch resistance
Euromicron Mould medical association logo has been tested by the in-house testing department. For example, the non-destructive testing processes such as pressure, vacuum and leak testing have been strictly performed. It is lightweight, allowing people to carry around very easily
Euromicron Mould automated coagulation analyser is of eye-catching design. Our Structural and Graphic Design Team work with customers during the product development stage to create high impact displays for retail and club settings. The hollow-fiber filter UF membrane with activated carbon offers a high flow rate
The manufacture of Euromicron Mould medical association logo requires various advanced facilities. It is fabricated under CNC machines, laser cutting, stamping, polishing machines and so on. With an integrated dust-proof cap, it ensures maximum safety
The product has stable performance and long storage time. It performs 4 stages of filtration, ensuring the water is clean and healthy enough
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...