Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
Euromicron Mould quick delivery plastic prototype wholesale for andon electronics

Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
  • Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
  • Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
  • Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
  • Euromicron Mould quick delivery plastic prototype wholesale for andon electronics
  • Euromicron Mould quick delivery plastic prototype wholesale for andon electronics

Euromicron Mould quick delivery plastic prototype wholesale for andon electronics

Euromicron Mould Engineering Limited is one of the key enterprises of national plastic prototype industry, whose leading product is plastic case for electronics .
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould plastic case for electronics is made in tune with international production norms. The product goes through several inspections before delivery with defects removed
2. As long as our customers have questions about our plastic prototype , Euromicron Mould Engineering Limited will make timely response. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda
3. The product is extremely durable and nonporous. It is processed under a high firing temperature which eliminates all water bubble and air. The complete after-sales service system is rendered for the product to maximize customer value
4. The product features high precision. Made of a CNC machine which features high accuracy, it is not prone to errors. The product is processed by about 400 staff with many years of experience
5. The product is eco-friendly. No inorganic glue is used. While the water-based glue is used to provide an extra level of security to certain joints. Its manufacturing meets the international quality standards


Euromicron Mould quick delivery plastic prototype wholesale for andon electronics-1
Euromicron Mould quick delivery plastic prototype wholesale for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould quick delivery plastic prototype wholesale for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould quick delivery plastic prototype wholesale for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited is one of the key enterprises of national plastic prototype industry, whose leading product is plastic case for electronics .
2. Euromicron Mould Engineering Limited has long been engaged in development and technology support of plastic enclosure box.
3. Taking the vision of plastic enclosures for electronics and adhering to the concept of custom plastic enclosures electronics are two important points in Euromicron Mould. Ask!
In the design process, various factors of Euromicron Mould plastic case for electronics are considered. These factors include comfort, durability, smoothness, drapability, breathability, and hand feel. The metal construction body ensures a long lifespan
On-site tests will be carried out during the inspection of Euromicron Mould plastic prototype. They include static loading, clearance, and real performance tests under the right testing equipment. It is perfectly suitable for right- and left-handed operators
Euromicron Mould plastic enclosure box has passed many tests conducted by third-party testing labs. It has been tested in terms of fiber content, tensile & tear strength, shrinkage, and colorfastness. Its special lowering valve enables the gentle lowering of the load
The design of Euromicron Mould plastic enclosure box is finished using various designing technologies. They include optoelectric 2D and 3D foot scanners, and CAD technology. This product is extremely resistant to corrosion
Euromicron Mould custom plastic enclosures electronics is meticulously designed. Various calculations are performed considering the desired speed and loads to decide its material and specific dimensions. This product is built in a weighing system for users to record
The product has good color retention. Made of special materials and treated with surface finish, it is not prone to yellowing. This product ensures smooth and effortless pulling and pushing
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...