Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery plastic prototype manufacturer for electronic components
Euromicron Mould quick delivery plastic prototype manufacturer for electronic components

Euromicron Mould quick delivery plastic prototype manufacturer for electronic components
  • Euromicron Mould quick delivery plastic prototype manufacturer for electronic components
  • Euromicron Mould quick delivery plastic prototype manufacturer for electronic components
  • Euromicron Mould quick delivery plastic prototype manufacturer for electronic components

Euromicron Mould quick delivery plastic prototype manufacturer for electronic components

Part Name:
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron has established a complete sales network to provide quality services for customers.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Product Comparison
Euromicron has great production capability and excellent technology. We also have comprehensive production and quality inspection equipment. injection mold has fine workmanship, high quality, reasonable price, good appearance, and great practicality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the same category, Euromicron's injection mold has the following outstanding features.
  • v s
Company Advantages
1. The quality of Euromicron Mould plastic prototype is constantly monitored by using advanced measuring equipment such as a wide range of height, bore, and other gaging equipment, and hardness tester equipment.
2. The strict internal quality control system guarantees the product to reach the international standards.
3. Its quality is seriously taken into account from material purchase to package.
4. Customers have undoubtedly increased dependence on the product.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould quick delivery plastic prototype manufacturer for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould quick delivery plastic prototype manufacturer for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited has been involving in the production of plastic enclosure for electronic products over the past years and gradually grows up into one of the most trustworthy partners in China.
2. It is plastic prototype that makes our products more standing out.
3. Euromicron Mould Engineering Limited is carrying the spirit of pioneering and enterprising, and keeps exploring forward. Get an offer! Creating value for customer is Euromicron Mould Engineering Limited's unremitting dream! Get an offer! As an essential focus, custom plastic cases for electronics plays an important role in the development of Euromicron Mould. Get an offer! We hold the belief that through persistent efforts, Euromicron Mould will thrive in electrical molding industry. Get an offer!
The raw materials of Euromicron Mould plastic enclosure for electronic products, mainly clay and kaolin, are sourced from suppliers who hold domestic quality certifications (GB/T) in the pottery industry. It can be used for various purposes, including kitchen and garage activities
Euromicron Mould plastic prototype is made of quality steel which requires sophisticated processing techniques. For example, the steel has to be cleaned, sandblasted, polished, and acid passivated. All these procedures are carried out by professional technicians. It helps reduce fuel consumption, malfunction, and damage
In the production stage of Euromicron Mould electrical molding, it has undergone a series of strict test processes including flammability tests, rain resistance test, and wind resistance test. It is easy to replace thanks to the O.E. exact fit design
The production of Euromicron Mould electrical molding is highly sanitary. It has to be produced in a dust-free environment to achieve the best water treatment effect. It is highly resistant to temperature and heat
Before the production of Euromicron Mould custom plastic cases for electronics, the requirements of raw materials such as substances function, allergens, size, color, and odor are sent to several suppliers to be compared. It will not break down with regular use
Quality is the top priority in our business strategy. It protects the engine from corrosion, abrasion, and excessive heat
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...