Unlike capacitive or resistive screen, the screen of Euromicron Mould plastic enclosure for electronic products is based on electromagnetic induction technology which is developed by our dedicated R&D staffs. It is especially useful in high-accuracy handwriting or drawing application.2.
The product can work under a wide range of temperature. It has been treated under thermal compression which ensures it to adapt flexibly to temperature change. 3.
This product is anti-pill, wrinkle-free, and provide long-lasting color, which is all due to the steps taken during the finishing process. 4.
The product will create a pleasing wearing experience. It will not impair the foot from functioning in a natural way while offering enough support and comfort. 5.
This kind of material is best for making shoes for running, skateboarding, keeping the foot cool or warm (such as sandals or boots) or just to protect the foot and look stylish.
|Part Name:||Electronic connector|
|Mould Cavity No.:||16+16|
|Injection gate:||Cold runner |
|Surface finished: ||Polishing #600|
|Core &Cavity steel:||1.2344, hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||120T|
|Mold life:||300000 shots|
◇◆ Summary for project running
There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.
Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.
Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.
Euromicron Mould Engineering Limited embraces strong competence in plastic enclosure for electronic products development and manufacture. Our capacity in this industry is market recognized. 2.
We have cultivated an in-house R&D team. They are responsible for the development of new innovative products and corporate with some famous laboratories in China. 3.
Euromicron Mould Engineering Limited is a conscientious and highly responsible team, adhering to its long-term vision for plastic enclosure box development. Ask! Euromicron Mould Engineering Limited well meets our customers' different requirements. Ask!