Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics
Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics

Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics

Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics

The tight network of production bases, sales and service training stations of Euromicron Mould Engineering Limited is throughout the country.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
injection mold, one of Euromicron's main products, is deeply favored by customers. With wide application, it can be applied to different industries and fields.Euromicron is dedicated to providing professional, efficient and economical solutions for customers, so as to meet their needs to the greatest extent.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Comparison
Under the guidance of market, Euromicron constantly strives for innovation. die casting mold has reliable quality, stable performance, good design, and great practicality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the same industry, Euromicron's die casting mold has the following characteristics.
Company Advantages
1. Euromicron Mould overmolding electronics is created in line with the principle of 'Quality, Design, and Functions'.
2. The stable performance and long lifespan make the product stand out from competitors.
3. Every detail of the product has been carefully inspected by profession QC staff.
4. Free maintenance service is available for our plastic enclosure box so you can be assured of it.
5. Only professional team can provide professional service and high quality plastic enclosure box.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould quick delivery plastic enclosure box manufacturer for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. The tight network of production bases, sales and service training stations of Euromicron Mould Engineering Limited is throughout the country.
2. We have an exceptional team of designers. They work consistently to provide innovative and functional design and achieve the highest levels of product quality.
3. Our company is based on values. These values ​​include working hard, building relationships and providing quality service to clients. These values ​​ensure that the manufactured product portrays the image of the client company. Contact us! We respond to corporate social responsibility actively. Sometimes we will participate in charitable giving, do voluntary work for the communities, or help the society in post-disaster reconstruction. Contact us! Bringing in a set of the first-class infrastructure for waste treatment, we have strong determination to handle environmental issues. These infrastructures will help us handle and dispose of wastewater and waste gases in line with international best practice.
Euromicron Mould plastic enclosure box has a secured source of raw materials. Opticlimate two-stage evaporation system can predict system performance and energy consumption
overmolding electronics design determines the final form of overmolding electronics from Euromicron Mould Engineering Limited. Innovative software system helps tailor air control solutions for opticlimate split unit
Euromicron Mould plastic enclosure box is designed in accorance with the basic production standard. Hicool's opticlimate packaged unit has been widely applied in greenhouse, offices and yachts
Euromicron Mould overmolding electronics is designed by the concerted effort of strong R&D team and design team. Opticlimate two-stage evaporation system is developed to deliver 100% fresh air cooling
In order to be the leading overmolding electronics manufacturers, our experts also focuses on its design. Opticlimate two-stage evaporation system is easy to clean and maintain
With the assistance of overmolding electronics, overmolding electronics has gained its popularity in the market. Opticlimate two-stage evaporation system is patented
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...