Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics
Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics

Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics
  • Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics
  • Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics
  • Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics

Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics

The design of Euromicron Mould injection moldable plastics adopts the advanced technologies and software which include computer-aided design (CAD), computer-aided modeling (CAM), etc. All the edges are rounded perfectly to prevent accidental hand injury
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould quick delivery injection moldable plastics supplier for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




The production process of Euromicron Mould injection moldable plastics is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. It is 100% biodegradable, causing no pollution to the environment
The production of Euromicron Mould injection moldable plastics is rigorously undertaken by the factory itself, inspected by the third-party authorities. Especially the inner parts, such as food trays, are required to pass the tests including chemical release testing and high-temperature withstanding capacity. It will decompose naturally within 60 to 90 days
Euromicron Mould injection moldable plastics is completed by our professional architects and engineers who consider every project carefully such as the location, topography, climate, and culture.
Euromicron Mould injection moldable plastics is carried out by our designers who aim to maintain and improve the lifestyle of customers by delivering the most effective and innovative wellness sauna product. It is 100% biodegradable, causing no pollution to the environment
The hardware components of Euromicron Mould injection moldable plastics have been tested by a third-party testing organization, passing the FCC, CE and ROHS safety certification. The product does not contain any harmful plastic or wax lining
It is thoroughly inspected to ensure zero defects. The product is thick and sturdy enough to hold heavy things
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...